直流TIG焊接电弧的数值分析

以直流钨极氢弧焊电弧为研究对象,考虑阴极几何形状,建立了轴对称电弧数值计算模型,在电流密度计算中包括了阴极区和弧柱区。采用ＳＩＭＰＬＥ算法求解磁流体动力学方程组。所得电弧弧柱温度分布与实验结果相吻合;电弧速度分布、电磁力分布、电流密度分布、压力分布等电弧参量的计算结果能较全面地反映电弧内部的作用机制。     

焊接工艺对熔敷金属韧性的影响

探讨了改变焊接工艺对焊条熔敷金属冲击韧性的影响．研究表明：改变焊接工艺,将通过改变熔敷金属的化学成分,影响熔敷金属的强度和韧性;降低焊接线能量时,将降低熔敷金属中的氧含量及其氧化夹杂物的数量和大小,从而提高熔敷金属的韧性     

高速电弧喷涂耐磨涂层性能研究

将低碳马氏体和3Cr13+AlRE伪合金高速电弧喷涂层进行了性能和组织结构的对比分析。实验结果表明,与伪合金涂层相比,低碳马氏体涂层呈现出更优异的力学性能、耐磨性能和机械加工性能。该涂层可用于发动机曲轴等零件的再制造。     

镁合金表面电弧喷涂Fe基非晶纳米晶涂层的性能

采用自动化高速电弧喷涂技术在镁合金基体上制备了FeCrBSiMoNbW非晶纳米晶涂层。采用Flir A20M型红外热像仪对Fe基非晶纳米晶喷涂层的表面温度场进行了实时监测。对Fe基非晶纳米晶涂层和传统的3Cr13涂层的组织结构、力学性能以及摩擦学性能进行了对比分析。实验结果表明：Fe基非晶纳米晶涂层组织致密,孔隙率低,具有相对较高的硬度和拉伸结合强度;形成了非晶相和纳米晶相组成的复合结构,使得涂层具备较好的耐磨减摩性能。     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

参数曲线几何连接的几个定理

导出了对参数曲线几何连接简单、实用的几个定理。     

等离子弧加热切削工程陶瓷试验

主要阐述了采用自制新型水介质等离子弧设备对氮化硅陶瓷材料进行加热辅助切削的试验条件及过程。通过对加工后刀具磨损的测量,总结出在热源距离h=8mm,电流I=6A,电压U=140V的热源条件下,采用V=450r/min、f=0·08mm/r和ap=0·2mm的切削用量时,刀具磨损比较小,切削效果理想。该试验说明了应用该小功率水介质等离子弧辅助加热切削氮化硅陶瓷材料的方法可行而有效,能够大大降低加工成本,对促进工程陶瓷材料的更广泛应用具有重要意义。     

Φ2mm丝材电弧喷涂工艺对涂层结合强度的影响

分析了喷砂预处理和电弧喷涂这两个过程的工艺参数对涂层的结合强度的影响。将分数维理论用于喷砂后的试样表面,研究了喷砂角度、分数维和结合强度的相互关系,找到了获得最高结合强度所用的喷砂角度;通过正交试验法,找到了能获得最佳涂层结合强度的Φ2mm丝材电弧喷涂工艺参数。     

SiC光学材料的电弧增强等离子体加工方法

Si C光学材料具有高化学稳定性,其在普通的等离子体加工中难以获得较高的加工效率。在等离子体加工实验中,发现提高等离子体的自身射频电压可增强等离子体与Si C材料之间的电弧放电作用,而借助电弧的增强作用可提高Si C材料的加工效率,因此提出电弧增强等离子体加工方法。为研究电弧的形成原理,使用自制的探针分别测量了普通电感耦合等离子体和电弧增强等离子体的电压。分别使用传统方法和电弧增强方法对S-Si C进行直线扫描加工实验,证明了电弧增强等离子体加工方法具有更高的加工效率。     

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

An attempt is made to develop the tools that are capable enough to withstand the shear, impact and thermal forces that occur during friction stir welding of stainless steels. The atmospheric plasma spray and plasma transferred arc hardfacing processes are employed to deposit refractory ceramic based composite coatings on the Inconel 738 alloy. Five different combinations of self-fluxing alloy powder and 60% ceramic reinforcement particulate mixtures are used for coating. The best friction stir welding tool selected based on tool wear analysis is used to fabricate the austenitic stainless steel joints.